Avtech AVH306 Manual de usuario descargar pdf (Pagina 38)

MAIN MENU

4) PRE-ALARM RECORD

Select to enable or disable the pre-alarm function (ON / OFF).

When pre-alarm and event recording functions are both activated, the NVR will record 8MB data before an

alarm / motion event is triggered.

5) OVERWRITE

Select “ON” to overwrite previous recorded data in your HDD when the HDD is full. When this function is on

and the HDD is full, the NVR will clear 8GB data from the oldest for continuous recording without notice.

6) KEEP DATA LIMITS (DAYS)

Assign the maximum recording days from 01 to 31 after which all the recorded data will be removed, or

select “OFF” to disable this function.

7) RECORD CONFIG

Click “SETUP” to enter the setting page individually for manual record, event record and timer record.

For details, please refer to “6.1.1 GENERAL” at page 19.

8) NVR MODE

Set the NVR to 6CH mode or 12CH mode, depending on your surveillance demands.

Note: Every time you change the mode, NVR will reboot automatically.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 137 138

Sin comentarios

Avtech AVH306 Manual de usuario Pagina 38